The zebra plant It is one of the most striking succulents that can be had at home, and this is not saying little precisely: we are talking about one of the groups of plants with the most attractive shapes and aspects. Despite its small size, its distinctive pattern of white lines on its pretty leaves gives the plant a unique and much appreciated appearance.
If you want to learn about the Haworthia attenuata care at home, keep reading with us about its characteristics and needs to grow it.
Characteristics of Haworthia attenuata
popularly called zebra plant or zebra succulentthe Haworthia attenuata It is a plant native to South Africa, like all Haworthia. Is a small non-cacti succulentwhich rarely exceeds 15 cm in height, which does not prevent it from attracting attention to any space in which we place it.
Its leaves appear forming a stemless rosette with up to 30+ color sheets dark green, with white, leathery lines that characterize them by crossing them horizontally and throughout their length. These lines offer a particular texture and can be carefully felt without causing any damage to the plant.
Flowering occurs in the warm months, with inconspicuous flowersbut which give the plant an even more peculiar appearance due to the long stems from which they hang.
Location for Haworthia attenuata
The zebra plant is usually grown as indoor plant, in wide, shallow pots and in an exhibition well lit but with indirect light. However, if the conditions are met that the temperature does not drop below 10 ºC and that the plant does not receive intense direct sunlight, it will also be possible grow it outdoors to beautify the garden.
In any case, you can always keep your Haworthia attenuata inside during the cold months, and take it outside in spring and summer once the heat has arrived.
Irrigation of Haworthia attenuata
During the months of plant activity, from spring to late summer, it is best to give the plant abundant but spaced watering. Normally, a good watering will suffice to soak the substrate without flooding it each 15 daysnot being necessary to water again until it is completely dry.
Since it is a succulent plant, the zebra plant has the ability to store water in their leaves, so it withstands occasional droughts very well. This is not the case with waterlogging, which must be avoided at all costs to avoid root rot problems.
When they arrive the cold months you have to water the zebra plant even lesssince it is even more susceptible to problems due to excess humidity. One watering per month approx might be enough.
If you place a saucer under the pot of your Haworthia attenuata, which is not generally recommended, always make sure to remove the excess irrigation water about 10 minutes after watering and whenever it accumulates.
In this other post you can learn when to water the plants.
Substrate for Haworthia attenuata
The zebra plant is not at all demanding with the land in which it is grown, being the only important point that it offers good drainage. you can use a universal substrate for succulents, or prepare your own mixture with peat and sand in equal parts, preferably somewhat coarse sand. Adding a handful of perlite never hurts, as it will improve the water retention properties of the mixture, saving you scares.
In this other article you can learn how to make a substrate for cacti and succulents.
Fertilizer for Haworthia attenuata
This species does not need more than a contribution of fertilizer per month during the spring and summer monthsand even this is more a question of bringing vitality to the plant and strengthening it and not of real necessity.
Uses fertilizer for cacti or, if you have it, worm humus, an ecological fertilizer with enormous beneficial properties.
Multiplication of the Haworthia attenuata
As always, one of the best things about growing succulents at home is how easy it is to multiply them to spread or give as gifts to friends and relatives. The zebra plant is no exception, and getting new plants through its suckers is very easy, although cuttings also work very well.
As if it were an aloe vera, it will suffice to carefully remove the suckers from the Haworthia attenuata that form at the base of the mother plant, gently separating them and simply replanting them in their new location. This will also strengthen the growth of the mother plant, which will not have to focus its efforts on them.
If you choose the Haworthia attenuata cutting, cut a leaf about 5 cm long with a sterilized blade and let it dry for about 48 hours before planting it again. It is not a very complex process, but it is still more risky than the sucker method, since you have to injure the plant and wait for roots to come out, which the suckers already have.
If you want to read more articles similar to Haworthia attenuata: carewe recommend that you enter our category .
